2. 2 sensor types to reduce inventory (two valve typesavailable)
3. Wireless sensor programming with Autel TPMS service tools
4.100%ID clone-able sensor with no re-learn required
5. Independently tested and certified to meet SAE standards
Autel MX-SensorSpecifications:
Battery Life: 5 years
Operating Temperature: -40C to +125C
Storage Temperature -40C to +150C
Operating Humidity: 90%
Operating Frequency: 315MHz
Pressure Monitoring Range: 100 to 900 kPa
Pressure Reading Accuracy: 10 kPa
Temperature Reading Range: -40C to +125C
Temperature Reading Accuracy: 5C
G Sensor Reading Accuracy: 15%
Transmission Power: 5-8 dBm
Battery:: 3.0 V
Dimensions (W x H x D): 55.1 mm x 29.4 mm x 21.8 mm (Clamp-in Sensor)
Weight (Without Valve):18.5 g (Clamp-in Sensor)
Autel MX-SensorInstallation Process
1.Loose the tire:Remove the valve cap and core and deflate the tire.
2.Dismount the tire:Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3.Dismount the sensor:With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4.Mount sensor and valve:Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5.Mount the tire:Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
